2014 dodge journey dash

Dodge Journey Dashboard Warning Lights (All Models 2009 to 2020)

Welcome to the ultimate guide to all dashboard symbols, warning lights, errors and faults for the 2000 to 2020 Dodge Journey. This will assist in troubleshooting, diagnosing and solving common automotive problems with this specific car.

Please note: This guide covers every single possible symbol/warning light for ALL model variations for Dodge Journey, including standard, premium and top-of-the-line models, plus variations in body shape. While this guide does cover your specific vehicle , your car may not have all the symbols featured on this list.

Dodge Journey Symbols and Warnings Guide

There are 25+ possible lights that may illuminate for a variety of reasons.

While this guide is helpful, please refer to your owner’s manual after reading through this list.

Dodge Journey Engine Fault

There are hundreds of reasons why the check engine warning fault light comes on, and only your dealer or mechanic is qualified to address this.

Common reasons include a loose fuel cap, excess vibration, a blocked cylinder, a bad fuel mix, excessive heat and half power.

This may also highlight an issue with your transmission.

Dodge Journey Check Engine Oil

This means your engine oil is running low or has been completely drained. Your engine may have an extensive oil leak and a mechanic will be required urgently.

At this stage, it’s not recommended that you drive your vehicle.

Dodge Journey Attention / Warning / Fault Detected

Either of these two lights will illuminate to get your attention to other dashboard warning lights and symbols.

These lights can also mean that the handbrake is engaged.

Dodge Journey Battery

This means your battery has low voltage and may need a replacing.

Should you choose to drive your vehicle with a faulty battery, you risk losing power to your battery at high speeds.

Many mechanics will prefer to visit your home to replace your car’s engine battery, rather than have you drive to them.

Dodge Journey Press Foot Brake

This symbol is your Dodge Journey telling you to press the foot brake.

This is required before starting the engine and moving the vehicle out of Park.

Dodge Journey Handbrake Engaged

Your handbrake is engaged.

This can be disengaged by hand, or your vehicle may have a handbrake that is disengaged with your foot.

Dodge Journey Airbag Fault

This means your driver’s side or passenger side airbag has a fault and may not deploy when required. However, it’s quite common for this light to illuminate due to a faulty sensor, rather than a faulty airbag.

Take your vehicle to your mechanic for inspection as soon as possible.

Dodge Journey High Radiator Coolant Temperature

This symbol represents excessive heat from your engine’s radiator. If ignored, you risk overheating your engine very quickly.

Common reasons are a low coolant level and a leak in the radiator.

Call or visit a mechanic immediately.

Dodge Journey Parking Sensors

This symbol represents the front or rear parking sensors. You will also hear an audible beep as you get closer to a wall, pole, tree or other object when reversing.

Dodge Journey Bulb Not Working

This means one of your driving lights has stopped working and requires either a bulb replacement or fuse replacement.

Dodge Journey Low Beam Lights On

This means your front standard driving lights are on.

These lights are used for 99.9% of driving.

Dodge Journey High Beam Lights On

This means your front high-beam driving lights are on.

These lights are used for 0.01% of driving and typically for country roads late at night. Fines can apply for use of high beams in dense residential areas. Do NOT use high team driving lights within 400 metres (1,000 feet) of an oncoming car.

Dodge Journey Automatic Low Beam Lights On

This means your front automatic standard driving lights are on.

These will illuminate by themselves on dusk, when entering tunnels and in other low light situations.

Dodge Journey Automatic High Beam Lights On

This means your front automatic high-beam driving lights are on.

Please be wary that these lights do not turn themselves on automatically around other cars.

Dodge Journey Automatic Lights Malfunction

Dodge Journey’s come with automatic lights, however, these can malfunction.

This is often an issue with the front low-light sensor. You may continue to drive and simply use your normal on/off headlight function until you visit a mechanic.

Dodge Journey Glow Plug Indicator Symbol

This is the Glow Plug Indicator symbol, which is found only in diesel-powered variants of Dodge Journey. Diesel engines require heat in the cylinders to operate, which is supplied initially by its glow plugs when the engine is freezing cold.

When illuminating green, this is operating perfectly but when yellow, a fault may exist.

Dodge Journey Vehicle Is In Park

This means your vehicle is in Park.

Dodge Journey Hood / Bonnet Is Open

While your front hood/bonnet may appear closed, it may show open on the sensor.

Dodge Journey Front Fog Lights Enabled

This means your Dodge Journey front fog lights are engaged. A similar symbol exists for the rear warning lights.

Note: In some areas, it is illegal to use fog lights when it isn’t foggy. Please check with your local authority.

Dodge Journey ABS System Fault / ABS System Off

Your vehicle’s ABS system has a fault and may not engage under heavy braking.

Please visit a mechanic as soon as possible.

Dodge Journey ECO Mode On

ECO mode in a Dodge Journey is an optimum driving mode.

Your throttle will not respond favorably to performance driving.

Instead, your fuel economy will be at its best, hence the term ‘Eco’.

Dodge Journey Truck / Boot Open

While your rear trunk/boot may appear closed, it may show open on the sensor.

Dodge Journey Front Radar Engaged

This means your front sensor is engaged.

This feature provides autonomous braking and adaptative cruise control.

Dodge Journey Lane Assistant On

This means your lane-keeping assistant is on.

This feature allows your vehicle to remain straight within its lane.

This may only engage above 40km/h or 25mp/h.

Dodge Journey ESP / ESC Engaged

This means your Dodge’s Electronic Stability Programme (or Electronic Stability Control in some countries) has been engaged.

This typically engages on wet, muddy or icy roads.

Dodge Journey Check Brake Fluid

This means your brake fluid has become low and may require topping up.

Dodge Journey Check Brake Pads

This means your brake pads have become low.

This may be difficult to check and may require visiting a mechanic as soon as possible.

Dodge Journey Steering Wheel Locked

This means your steering wheel is locked.

This is an anti-theft symbol that flashes when your vehicle is locked.

Dodge Journey Service Due Soon

This means your vehicle is due for servicing soon.

Your mechanic may have programmed an alert within your car’s computer to illuminate this symbol upon crossing a certain odometer reading.

Dodge Journey Heated Seats

This means your heated seats are on.

The number of vertical lines represents the level of heat.

Dodge Journey Cruise Control Activated

This means your cruise control has been activated and is ready to use.

However, your cruise control will not be on. It’s simply ready to switch on.

Cars often use 2-buttons to avoid accidentally turning on cruise control.

Dodge Journey Check Wheel

This means you have an issue with your wheel.

This isn’t the rubber tire but the wheel itself.

Issues include alignment, steering and balance.

Dodge Journey Heated Windscreen

This means your windscreen is being heated to melt frost or ice.

This may turn itself off automatically.

Dodge Journey Air Suspension Fault

If your Dodge Journey has air suspension, then this symbol represents a fault.

This could be a deflated rear suspension air bag, an air leak or a sensor issue.

Dodge Journey Tire Air Pressure Fault

This means your tire pressure is either too low, or the sensor has faulted.

This requires calling or visiting your dealership as soon as possible.

Dodge Journey Intermediate Windscreen Wipers On

This means your automatic windscreen wipers are on. No action is required.

Ultimately, your car is trying to tell you something. You should consult your owner’s manual and have your car inspected by a qualified mechanic as soon as possible.

Symbols Have Different Colors

Much like traffic lights, the color of your dashboard symbol light is just as important as what it means. The lights can also flash to draw your attention to a more severe and time-sensitive issue.

When a Dodge dashboard warning light is green or blue, they are simply telling you that one of your car’s features is being used, or has been activated. No action is required at this time.

When a light is yellow, your car is trying to tell you that a less common safety feature of the car is being used (such as stability control on wet roads), a mild fault has been detected or a repair may be required. If you’re unsure, you should seek the services of a mechanic or dealership as soon as possible.

Orange or Red

If the dashboard on your Dodge is orange or red, this can be a signal that your vehicle is experiencing a problem that needs urgent attention . You MUST call or visit your dealership or mechanic immediately.

This dashboard symbols guide is for entertainment and informational purposes only, and does not replace seeking professional advice from a certified technician or expert mechanic. Please consult with a certified technician or mechanic if you have specific questions or concerns relating to any of the topics covered herein. Under no circumstances will DashboardWarningsLights.com be liable for any loss or damage caused by your reliance on any content on this website.

Joshua Lee is the writer, editor and owner of DashboardWarningLights. Joshua has a deep obsession with the automotive industry, for both passenger vehicles and trucks. When he isn't writing or driving, he enjoys exploring in the great outdoors!

DASH-LIGHTS.COM

Dashboard Warning Lights Explained

Dodge Journey Dashboard Warning Lights

64 thoughts on “ dodge journey dashboard warning lights ”.

My dash board lights only goes off for like 10minutes and then comes back on permanently after turning off the engine and locking the car doors. this drains my battery

I got a warning light that I can’t find in my manual or on line. It looks like a screw in the side of the vehicle. Can you tell me what it means?

Hello Patricia, Are you sure the car and screw warning light is not a loose gas cap symbol?

I checked these on mine but did not affect car with large screw hovering.

I just got that light today…is it the gas cap

Put antifreeze in the car gauge says the oil temperature is rising the transmission fluid temperature is rising and the coolent temperature is rising and says 5470 engine hours what does this mean

Hi Wanda, How old is the existing antifreeze? If it’s several years old, it may require flushing, else there may be sludge build up resulting in the system getting blocked. Transmission systems can also make use of the car’s cooling system and can overheat if there’s a problem. Also check your char’s water pump. The engine hours is referring to how many hours your engine has been in operation over its lifetime.

Patricia I had the dame this last week and even the mechanic had never seen it I checked the gas cap, took if , screwed it in again, but no change. Had the lugs tightened on wheels though he said they were fine= zi have NO IDEA. It bothers me that it’s not in the manual

2014 Dodge Journey: 3 warning lights came on simultaneously. Oil which is full, tired which are filled to spec. and eve light. What causes this and how do I fix it?

Hi Tom. Rather than ‘eve light, did you mean ABS light? Sounds like sensor issues. I would concentrate on the oil light initially as this is the most serious and have your engine pressure checked. If it’s good, it may be the oil pressure sensor.

My 2009 Dodge Journey’s instrument panel completely lights up when shifting from 1st to 2nd. You can feel a slight jerk and click. Tranny works fine but the dashboard is completely lit up. I already reset the dashboard but it comes on immediately when shifting from 1st to 2nd.

Round red light came on three times went out each time what is this red dot panel with rpm’s

Hi Yolanda. I think it’s the vehicle security warning light. Have you changed or disconnected the battery?

I have a 2009 Journey. Sporadically, the ESC light will come on, and the car starts running very rough….almost to the point of stalling. However, if I keep a steady flow of gas, it doesn’t stall on me. Do you know how the gas and ESC error light would be related causing the car to run so badly? Thank you!

Hi Amy, Part of the ESC (Electronic Stability Control) system is to cut engine power and can also apply braking. This helps with traction (preventing wheel spin), oversteer and understeer. If the system is faulty, it could be engaging when it’s not supposed to and giving you the rough engine and problems accelerating. This could be something as simple as a wheel speed sensor that’s at fault, or the ESC module, steering angle sensor.

On my dashboard. Red light came on.and i can’t find the red light symbol.i have a 2010 dodge journey.i have look up the symbols on my phone and i can’t find that symbol.

Hi Loretta Can you describe the light?

I’m having a similar problem as Amy. Sometimes my ESC light will come on and it says OFF though. Basically ESC OFF it shows the image, but it says OFF. It happened today. I turned on the car and the light came on and I had to get in the interstate and I was going 70+MPH and whenever I would let my foot off the gas and the vehicle would stutter and feel like it wanted to stall. The MPH would begin to drop and I wasn’t able to increase by speed. It would drop to about 60 MPH and then I would be able to increase by speed again..I have a 2011 Journey.

I am having the same problem…did you ever figure out how to fix it??

2018 Dodge Journey check engine light and it woo t switch gears. It will jerk really hard then it won’t switch gears

I have a flashing “Dodge” symbol that flashes then remains on for a short time. The tipm has been replaced. Could it be a reset is needed?

What does red ‘Back’ light mean

what does it mean when the letters PSI come on?

On my 2010 Dodge Journey. The Eps light is staying on

My dodge journey yellow light has just come up. Although today I’ve had new tyres and rims fitted have you any idea as to why if so any help will be appreciated thanks

Hello Kelly, I assume you mean the tyre pressure warning light? The tyre pressure light coming on after having new tyres fitted is usually a sign that a sensor has not been fitted, not been fitted correctly or damaged during the tyre fitting service.

I have a stupid question! Do I turn on the slippery car symbol when I’m driving in the snow?

Hi Janie, No, don’t touch it, it will automatically be on already. If you press the button so that the slippery car symbol illuminates, you’ll be switching the system off. On most cars it’s called electronic stability control (ESC) or something similar. ESC comes on automatically each time you start the car.

If you happen to get stuck in snow and can’t get out, you might need to rock the car backwards and forwards. In this situation, you press the ESC button (slippery car symbol), or the traction control button to deactivate traction control. By leaving traction control on, it’ll stop or reduce wheel slip, but if you’re stuck in snow, you want wheel slip to help free your vehicle. Once you’re free from the snow, press the button again to switch on ESC.

Hello, I have a 2016 journey and I get the ETC and the ESC indicators on. Usually I pull over, turn off the car and wait a few seconds but now it’s happening more often. What is this and how can I fix it?

Hello, my ETC and my ESC have started to come on, more in the past 2 days. What should I do to fix this? I have changed the alternator and the battery and it still keeps coming on

Hello Al, The throttle sensor is quite a common fault with the Dodge Journey. The throttle body might need to be replaced.

My etc light came on and now the car isn’t starting what do i do? its not even turning its my moms car and she’s on vacation

Is the car turning over? Things to check are battery charge and connectors. Throttle body is often an issue, sometimes to do with the sensor.

Hello, I have a 2014 journey and I get the ETC and the ESC indicators on. Usually I pull over, turn off the car and wait a few seconds but now it’s happening more often. What is this and how can I fix it? Now it barely even starts half the time what is wrong?

Hi Angel, It’s usually to do with the throttle body. Usually throttle control sensor or position sensor, sometimes the wiring. An issue with the throttle may disable the ESC, so sorting out the throttle issue is likely to fix the ESC issue.

Battery died.Had it jumped.Cars great never any problem. We under reaio are buttone to push for Air, a C button, from, rear ans slippery traction. We t g we button next to air that has C on it bliks :& I don’t know ow if could be a fuse of something more serious My husband fixed these problems but he passed suddenly 90 days ago Can someone answer my question please. I’m in Florida and you can’t dive In aug8with no circulating air. I’m at [email protected]

I have a 2011 journey with 131791 miles on it for the 1st time since owning it in the little center window it’s showing what gear I’m in p r d but it also has a round clock like light right next to the gear light what does that mean I have had nothing but problem’s with this piece of junk the Camara quit heated seats quit had to replace a heater core had to replace head gaskets battery altanator brakes every 1 1/2 years in front worse car ever owned some how front drive shaft got bent or something so the whole car,s vibration was so bad you could not drive the thing .

Hi Dean, Sounds to me like you need to get rid of ASAP. I’m afraid I’m not too sure. Looked into it and can’t find any info. All I can think is that it’s symbol of a reminder – maintenance / service? Hopefully someone else will know.

Hi, there. When I was driving my 2014 Dodge Journey on hyw feeling the car was shaking, I could see my arms were shaking, about half hour later sign on the middle screen looks like a double lined Red Cross while a Ding sound, and disappear soon. Then I got out the Hyw, the shaking was disappeared on 50km/h. Anyone know what’s the sign for? Just changed my tires at Costco three month ago.

I have a 2014, when I put it in reverse a over look of the vehicle comes up on the dashboard with a SERVICE light under it and a dinging sound comes on. This has been going on for awhile, the rear camera works fine and has not ever been damaged. Any ideas on if this is a normal thing or is it something more?

My 2012 journey has a small red polite and a exclamation icon red in colour be for it what does it mean can’t find a explanation any were it is on the rite round dash gauge thanks

Hello everyone while reversing today for my dodge Journey 2018, I noticed a sign came up on the reverse showing clean what does that mean

Hi Teddy, Could it be to do with the backup camera or ParkSense sensors that need cleaning? The ParkView camera is located on the rear of the vehicle above the rear license plate and the outer surface and the underside of the rear fascia/bumper require cleaning and kept clear of snow, ice, mud, dirt or other obstruction for the ParkSense sensors.

I have a 2015 diligence journey. Every now & then going downhill I get an ! Mark and a P. Both are in red circles. Mai

Hi Mai, I should have your vehicle braking system serviced. Always best to have anything to do with brake issues checked out right away. It is worth checking under the hood at your brake fluid levels, as this level will fall over time as brake pads wear low. Also keep an eye on brake pads, they require replacing after a while.

The ETC Light and the traction light lit up. What does this mean? Is it because my air tire pressure is low?

Hi Betsy, It’s unlikely to be related to tire pressure, but it’s best to keep tire pressures up to the recommended values as stated on the sticker inside the door jamb. This will improve stability and fuel consumption. The Dodge Journey does have issues with the throttle body, often needing replacement. This fault can trigger reduced engine power mode (limp home mode) and often systems such as traction control can be automatically deactivated as a result.

What is the small red P with a ! Red icon be for it mean on my 2012 dodge journey it is in the rite round dash gauge

Hi Doug, I’m not sure either I’m afraid. All I can think of is a problem with Park (P). If it would be parking brake related, it would be contained in a circle and parenthesis.

In 2014 dodge journey..the inside lights flashed on and off for 2 minutes while dash had a dinging sound..stopped for a minutes started again..lasted 15 minutes til I got home.. what’s this mean??

Hi Alicia, Is it a specific timed flashing or more of a sporadic flickering? There are some issues with Dodge Journey’s with flicker interior lights, or lights staying on which is related to bad wiring / short issues. A wire that controls lighting to the trunk is a common culprit.

Hit a large pothole and now the ads light along with other lights come on. Sometimes the lights will come on when turning on the ignition and other times it does not. I was told that this could be a wheel bearing problem or an ABS shortage anyone have any ideas.

Hi Eugene, Yes, as you say, wheel bearing is a possibility. There’s also a wheel speed sensor located at each wheel, these sensors are prone to damage and that could also be the issue. If you’re noticing any noise from the particular wheel that hit the pothole, humming noise, looseness in the steering, vibrations etc, this may also be a symptom of a damaged wheel bearing.

Hi I have a 2014 dodge journey and my engine light came on and hasn’t gone off I had a service last week and nothing was bought to my attention. We had a -1 degree morning and the car was frozen could this have an impact on this light coming on?

Hi Kelly, Yes the colder weather can impact on your car. Usually though, it’s the cold weather, triggering the engine light that’s making an already underlying problem worse, hence the light. There’s no way of knowing why the engine light is on other than having diagnostics. When the engine light comes on, you’ll typically have a fault code generated and stored. A diagnostic OBD II tool is used to scan for the codes and point you to where the fault is. You should be able to find an auto workshop where you’ll receive a free diagnostics check.

I had a Throttle Replacement a month ago, for my 2014 Dodge Journey with 67,000 miles at the Dealership. No w, a red sailboat light with a chime just came on. What could this mean. Please help, thank you!

Hi Dionne, A sailboat light? It’s not the engine coolant light is it? (see above)

Hi My Dodge Journey stx 2012 model 3,6 shows slippery Warning light, ABS, Brake and constantly feels like its going to cut but doesn’t cut at all. What it might be?

Hi Xolani, I should check your brake fluid level. A common cause for the ABS and slip indicator light to come on is a faulty wheel speed sensor. However, as your brake light is illuminated, you should have any fault codes read with a diagnostic scanner right away.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Vehicle Manufacturers

• Mercedes-Benz

Vehicle Type

• Commercial Vehicles

Warning Lights

• Dash Warning Lights
• Car Warning Light Colour Meaning
• Privacy Policy

• Fuel Consumption
• Engine Sizes
• Engine Torque
• Engine Power
• Towing Capacity
• Seating Capacity
• Steering Wheel Size
• Dimensions and Weight
• Fuel Tank Sizes
• Trunk Space
• Tire and Rim Sizes
• Bolt Patterns
• Coolers and radiators
• Radiator Fan
• Heat Exchanger
• Intercooler
• Timing Belt
• Sizes of Wiper Blades
• Cabin Filter
• Fuel Filter
• Transmission Fluid
• Antifreeze & Coolant
• Brake Discs
• Brake Drums
• Brake Fluid
• Bulbs For Fog Lights
• Bulbs For Headlights
• Bulbs For Turn Signals
• Bulbs For Licence Plates
• Bulbs For Markers
• Bulbs For Rear Fog Lights
• Bulbs For Backup Lights
• Bulbs For Brake Lights
• Technical Specs
• Car History

• Engine & Fuel
• Coolers and Radiators

Lightning Bolt on Dashboard in Dodge Journey - What’s This?

CarAraC auto mechanics and car experts

Your Dodge Journey has warning lights that illuminate on its dashboard , just like every other modern car. For example; the vehicle security warning, brake warning, airbag warning, battery warning, engine oil pressure warning, etc. Then there's the lightning alert that you may not be familiar with.

Lightning bolt warning lights highlights

• Common reasons: throttle control problems
• How to fix: disconnect the battery for some time, use scanner and get trouble codes
• Possible consequences: you may get stranded
• Priority level: High
• Can you drive? Carefully
• DIY repair: Impossible
• Repair price range: $150-$800

Brief Background to the Dodge Journey

Dodge Journey vehicles are medium-sized crossover SUVs (CUVs) that are issued by the Dodge brand. They were first released in 2009. Then there was a rebadge to the Fiat Freemont in 2011 as a parallel collection. The cars come in right-hand and left-hand drive.

The Dodge Journey comes with warning indicators just like other Dodge models. When these warning lights come up; it could be a system malfunction, security issue, or need for urgent maintenance.

Driver safety shouldn't be taken for granted, especially when a warning light comes on. Taking a related risk could be bad for you and/or the vehicle

What Is the Electronic Throttle Control on a Dodge Journey?

Your Dodge's electronic throttle control features an accelerator pedal module which has a motor, sensors, and a throttle plate. It's a great improvement from the traditional mechanical linkage in old-model cars. Although it isn't immune to mechanical faults.

The ETC measures the pressure drivers apply on the gas/accelerator pedal. The pedal isn't mechanically linked to the engine. A sensor tracks the pedal's position and the data is transmitted to the ETC for engine RPMs (revolutions per minute) to be adjusted.

Gas pedal pressure will determine how much the throttle passage will be opened. There's a flat valve at the opening that's regulated by the pedal's movement. It's called the throttle plate or butterfly valve.

The throttle plate rotates inside the throttle body when you depress the pedal. Then the air will be let into the intake manifold and quickly drawn into it by its vacuum.

1) Sensors in the ETC System

Two sensors that are instrumental to the ETC's operations include the following:

• Mass Airflow (MAF) Sensor

The mass airflow (MAF) sensor calculates the change in airflow. It will then send results to the engine's control unit (ECU) or electronic control module (ECM). This sensor is usually located between the throttle body and the air cleaner.

• Throttle position (TPS) Sensor or Throttle Valve Position Sensor

It's linked to the throttle body and it tracks your Dodge's throttle angle. You can find it on the reverse side of the throttle plate.

Don't get confused about the two sensors mentioned above. The TPS simply informs the ECU/ECM that you've depressed the gas pedal, while the MAF detects the air added. The NAF

2) The Role of the ECU

It's the ECU that controls the balancing of the air-fuel mixture in real-time. It also calculates the best moment to activate the spark plugs to ignite the balanced air-fuel combination.

3) Wide-Open Throttle (WOT)

This is what's referred to as full throttle. It's when the throttle is fully opened on an internal combustion engine or in your car. WOT also means the max-speed state of running an engine or the usual condition of a completely opened butterfly valve or throttle plate.

Your depression of the gas pedal in this situation is referred to as "flooring it". There'll be maximum intake of air because of the lowest resistance to incoming air.

What Does the Electronic Throttle Control Warning Light Mean?

The electronic throttle control warning light on your Dodge Journey could mean that the system has detected a communication problem that has resulted in an ETC error. It's most likely a result of a miscommunication between the ETC and its related sensors.

Dodge Journey vehicles were introduced almost a decade and a half ago, so the dashboard instrument cluster arrangement may vary based on the model year of your car. Still, the lightning symbol is very easy to notice when it illuminates.

Electronic Throttle Control Warning Light Behavior

The electronic throttle control warning light can be a troublesome alert that can come on at any time after the first illumination. And it can go off easily and come on after some days or even weeks. It may stay on for hours in some cases, only to stop when you restart the vehicle.

It will seem like the alert has a mind of its own. Worse still, the symptoms of the fault may not be easy to notice. The car might just be driving just fine regardless of the warning light. There's no need to get confused or nervous.

The ETC light could stay on after the initial indicator check when you first start your car. It could also activate when driving. Even the check engine light (CEL) could activate with it simultaneously.

What To Do Immediately After Noticing the ETC Warning Light

You could continue driving, but it wouldn't be the best move. Just remember to get the car checked at your earliest convenience if you decide to take the RISK.

Drivers could also stop the Dodge instead and park it at a convenient spot or put it in "park". Then proceed to put the engine off and cycle the ignition. The warning light may go off at this point.

Your car should be drivable if the alert doesn't go off. But the vehicle will need to be serviced ASAP. In case of the light flashing, then you should understand that the problem is a severe one that demands more urgency. It won't be advisable to drive the car in such a scenario, but you actually could.

Utilize a diagnostic scan tool to check for vehicle fault codes if you have one. This should be done before any other thing-be it DIY physical checks or hiring a professional technician. It may save you from getting scammed by the dealer or mechanic with a wrong diagnosis and unnecessary repair bills.

Ask the professional or dealer attending to you if they can let you be with them in the vehicle as the diagnoses are taking place. Some repairers offer such a service.

You'll have to take your car to the dealer or auto repair workshop immediately if you don't have a scan tool. Decreased engine power, rough engine noise, or abnormally high idle speed may be experienced if you drive the Dodge while the light is flashing.

Performance issues such as misfiring, stalling, and unstable throttle feedback when the light comes on while driving means you must stop the car. Towing the vehicle to a repairer is recommended at this point if you want to avoid complicating the situation.

Other Symptoms of a Bad ETC

You should look out for the following signs when the ETC alert comes on:

• Idle surges
• Rough idling
• Uninitiated acceleration (car accelerating by itself)
• Reduced fuel mileage (poor fuel economy)
• Engine misfiring

Electronic Throttle Control System Reset Procedure

The problem being indicated by the ETC light might just be the need for a gas pedal reset. The pedal position might not be well lined up or aligned. This will result in a communication error with the sensors that trigger the motor which closes or opens the throttle. Such could be the case in a high-mileage Dodge Journey.

Thankfully, the pedal reset can be done on your own instead of hiring a professional. Follow the steps below carefully to reset the pedal.

• Step 1: Switch on the ignition key without starting the vehicle.
• Step 2: Press the accelerator pedal to the floor and ease it up.
• Step 3: Start the vehicle and depress the pedal again. Observe whether your Dodge will respond or not. Check to see if the ETC light has gone off as well.
• Step 4: Proceed to drive the car around to see if the ETC is working well and if there are no other issues.
• Step 5: Take the car to a repair place if the throttle problem continues and the ETC light is still on.

Most of the warning lights that illuminate on your dashboard can't be taken for granted. And the Dodge Journey electronic throttle control warning light isn't an exception. That's why they're referred to as warnings. Always deal with the lightning symbol alert coming on as soon as possible.

Scanning your Dodge for diagnostic trouble codes (DTCS) will help in eliminating so many possibilities related to the ETC alert. It will save you from diagnostics bills at a repair shop or wasting money on "trial and error". You may only need to do a simple fix such as swapping out the air filter and ETC sensor, or resetting the pedal.

About the authors

The CarAraC research team is composed of seasoned auto mechanics and automotive industry professionals, including individuals with advanced degrees and certifications in their field. Our team members boast prestigious credentials, reflecting their extensive knowledge and skills. These qualifications include: IMI: Institute of the Motor Industry, ASE-Certified Master Automobile Technicians; Coventry University, Graduate of MA in Automotive Journalism; Politecnico di Torino, Italy, MS Automotive Engineering; Ss. Cyril and Methodius University in Skopje, Mechanical University in Skopje; TOC Automotive College; DHA Suffa University, Department of Mechanical Engineering

Add comment

• Electronics
• Car & Vehicle Electronics
• Vehicle Electronics Accessories
• Car Dash Mounting Kits

Add to your order

• No Additional Cost: You pay nothing for repairs – parts, labor, and shipping included.
• Coverage: Plan starts on the date of purchase. Malfunctions covered after the manufacturer's warranty. Power surges covered from day one. Real experts are available 24/7 to help with set-up, connectivity issues, troubleshooting and much more.
• Easy Claims Process: File a claim anytime online or by phone. Most claims approved within minutes. If we can’t repair it, we’ll send you an Amazon e-gift card for the purchase price of your covered product or replace it.
• Product Eligibility: Plan must be purchased with a product or within 30 days of the product purchase. Pre-existing conditions are not covered.
• Terms & Details: More information about this protection plan is available within the “Product guides and documents” section. Simply click “User Guide” for more info. Terms & Conditions will be available in Your Orders on Amazon. Asurion will also email your plan confirmation with Terms & Conditions to the address associated with your Amazon account within 24 hours of purchase.

Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime Try Prime and start saving today with fast, free delivery

Amazon Prime includes:

Fast, FREE Delivery is available to Prime members. To join, select "Try Amazon Prime and start saving today with Fast, FREE Delivery" below the Add to Cart button.

• Cardmembers earn 5% Back at Amazon.com with a Prime Credit Card.
• Unlimited Free Two-Day Delivery
• Streaming of thousands of movies and TV shows with limited ads on Prime Video.
• A Kindle book to borrow for free each month - with no due dates
• Listen to over 2 million songs and hundreds of playlists
• Unlimited photo storage with anywhere access

Important:  Your credit card will NOT be charged when you start your free trial or if you cancel during the trial period. If you're happy with Amazon Prime, do nothing. At the end of the free trial, your membership will automatically upgrade to a monthly membership.

Return this item for free

Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges

• Go to your orders and start the return
• Select the return method

This item has been tested to certify it can ship safely in its original box or bag to avoid unnecessary packaging. Since 2015, we have reduced the weight of outbound packaging per shipment by 41% on average, that’s over 2 million tons of packaging material.

2 Year Electronics Protection Plan

3 year electronics protection plan, other sellers on amazon.

Image Unavailable

• To view this video download Flash Player

Metra 99-6520B 2011- Dodge Journey Dash Kit with Factory 4.3" Screen Retention (Matte Black)

Kit + Cable

Kit + Control Interface

Purchase options and add-ons

About this item.

• Description; iso din radio provision with pocket; iso ddin radio provision; included interface retains factory 4.3 inch screen; painted matte Black to match factory finish;
• Note: does not retain sound from driver convenience group; wiring and antenna connections; wiring harness:; interface and harness included; antenna adapter:; 40-eu10 (sold separately);
• Dodge journey (models with 4.3 inch screen) 2011-up
• Package weight: 2.0 lbs

Buy it with

Top rated similar items

What's in the box

• Aftermarket stereo installation dash kit

Product information

Warranty & support, product description.

Metra 99-6520B dodge journey (w/ 4.3 inch screen) 2011-up. aftermarket stereo installation dash kit

Looking for specific info?

Product guides and documents, customer reviews.

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

Customers say

Customers like the ease of installation of the av receiver. They mention that the instructions are spot on and that it was professionally installed. They also say that it fits perfectly in their 2014 Dodge Journey. However, some customers feel that the overall finish is not great and that the quality is not very high.

AI-generated from the text of customer reviews

Customers find the installation process of the av receiver pretty simple. They say the instructions are spot on and the product was professionally installed.

" Everything was plug and play . Works great and easy to install" Read more

"...It was professionally installed , of course extra modules are needed. I have to buy the SiriusXM turner to complete the system...." Read more

"...Other than those, it's a pretty simple install . It's very expensive though, but there aren't many other options - if any...." Read more

"...The instructions are spot on , but the overall finish is not great, if you don't own the car and took a ride it would be obvious this unit is not OEM..." Read more

Customers are satisfied with the fit of the av receiver. They mention that it fits perfectly in their 2014 Dodge Journey.

" Fits ..comes with everything.. except for harness for antenna and new radio of course....(remember to buy your new head unit...lol)..." Read more

" Perfect fit in my 2014 Dodge Journey. Retained all factory controls as well." Read more

"Awesome... fit perfect in my Dodge Journey " Read more

Customers are dissatisfied with the quality of the av receiver. They mention that the overall finish is not great and that it is not very high quality.

"...because the silver line that was there is just black, and not even the same finish ...." Read more

"...Especially for the price. All in all it works but isn’t very high quality at all. Is it worth the price?..." Read more

"...The instructions are spot on, but the overall finish is not great , if you don't own the car and took a ride it would be obvious this unit is not OEM..." Read more

Reviews with images

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Host an Amazon Hub
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices

Used 2014 Dodge Journey - Specs & Features

See Edmunds pricing data

Has Your Car's Value Changed?

Used car values are constantly changing. Edmunds lets you track your vehicle's value over time so you can decide when to sell or trade in.

Related Used 2014 Dodge Journey info

Shop used vehicles in your area.

• Used Dodge Journey 2013
• Used Dodge Journey 2018
• Used Dodge Journey 2016
• Used Dodge Journey 2010
• Used Dodge Journey 2017
• Used Dodge Journey 2011
• Used Dodge Journey 2012
• Used Dodge Journey 2014
• Used Dodge Journey 2019
• Used Dodge Journey 2015 For Sale

Popular new car reviews and ratings

• Volkswagen ID.4 2023
• Nissan SUV Armada
• 2023 Audi Q8
• Kia Sportagehybrid
• 2025 Volkswagen ID.4 News
• 2025 Kia Sportage Hybrid News
• Lexus GX V8
• Subaru Solterra
• 2023 Jeep Grand Cherokee

Other models to consider

• 2023 Dodge Challenger
• Dodge Intrepid 2023
• 2023 Hornet
• 2023 Dodge Durango
• 2024 Dodge Durango
• 2024 Durango
• 2023 Challenger
• Dodge Hornet

Other models

• Used Honda Insight in Kingsport, TN
• New Jeep Grand-Cherokee for Sale in Logan, UT
• Used Mitsubishi Lancer in West Monroe, LA
• New Kia Sportage-Plug-In-Hybrid for Sale in Moses Lake, WA
• New Honda Odyssey for Sale in Wisconsin Rapids, WI
• Used Lexus Is-F in Vallejo, CA
• New Audi S5 for Sale in Saratoga Springs, NY
• Used Kia Stinger in Watertown, CT
• New Volvo V90-Cross-Country for Sale in Rome, NY
• Used Chevrolet Silverado-2500Hd in Laurel, MD

Join Edmunds

Receive pricing updates, shopping tips & more!

Dodge Journey Dashboard Lights And Meaning

Dodge Journey is a crossover SUV car marketed by FCA’s Dodge Brand (2009) that gives you a potent engine along with Low starting price. Its infotainment system is so trouble-free to operate with more user -friendly technical features.

This car highly appealed to a next-level performance with comfy driving. It comes with an excessive lean body that makes its infrastructure more stylish and upgrades your status. 

Such trendy cars are composed with so many warning indications displayed on the car’s dashboard. It highlights the malfunctioning of the system’s components, security issues, and immediate maintenance whenever needed. It is highly suggested not to neglect these lights as it can risk the safety of the driver.

Look below the warning lights that demonstrate the respective meanings of these indications.This Dodge Journey dashboard warning lights guide also let you to go through the actions that should be implement when these warnings flickers. You can also refers the other models of Dodge on our site like Dodge Charger, Dodge Durango,  Dodge Challenger and Dodge Ram Truck.

Dodge Journey ABS Warning Light

This dashboard symbol activates to indicate a malfunction in the Anti-lock braking System of your vehicle. In this scenario, you can still use your conventional parking brakes without the assistance of ABS. Later you have to inspect your car at Dodge service centre.

Dodge Journey Air Bag Warning Light

If this dashboard light flickers on your dashboard then it indicates a problem in the airbag system and it could not puff out in a crash or a hit. In this case, get serviced your airbag fault from nearby Dodge service centre.

Dodge Journey Battery Charge Warning Light

This warning light gets turn on when the battery is not adequately charged. If this light stays on for a long time, it indicates some malfunction in the charging system. Go and check your vehicle in the service centre.

Dodge Journey Brake Warning Light

This dashboard light gets active when the parking brake is applied or there is a fault in an anti-lock brake system, may be the brake fluid level is getting low in your vehicle. Suppose this light stays on for a longer time than it indicates that parking brakes are disengaged. So, release the parking brakes as earliest. And if this light is still on then go check your vehicle by Dodge service centre.

Dodge Journey Door Open Warning Light

This light gets activated when the Doors of your Dodge journey remain open and not closed properly.

Dodge Journey Electric Power Steering Fault Warning Light

This dashboard light activates when the electric power steering system is detecting a fault in it. If you continue your drive in this warning light, it can create a risk to your safety.

Dodge Journey Electronic Stability Control Active Warning Light

This dashboard light activates on your Dodge Journey Dashboard to indicates that the stability control system is activated in your car, and it is all set to assist you with the road grip and stability.

Dodge Journey Electronic Stability Control Off Warning Light

This warning symbol illuminates on your Dodge Journey dashboard to indicate that the Electronic stability control system is off in your vehicle. Now it will not assist you in controlling your car.

Dodge Journey Electronic Throttle Control Warning Light

This dashboard light gets activate when it indicates a problem in the electronic throttle control system. In this case, completely stop your vehicle and place it in a PARK position. If this light stays on for a long time, then it may reduce your vehicle performance.

Dodge Journey Engine Check Malfunction Indicator Warning Light

This light displayed on the Dodge Journey dashboard to indicates any malfunction in the engine. This light associates with the Automatic Transmission control system and engine monitoring of your vehicle. In this light, we highly advised you to contact dodge service centre.

Dodge Journey Engine Coolant Temperature Warning Light

This warning light activates to alert the driver that the engine of a vehicle is overheating. If this coolant temperature becomes high, then it indicates the chime sound. In this case, a driver should immediately stop the car and turn off the air-conditioning system. Shift your vehicle into the NEUTRAL transmission and idle the vehicle. Immediately switched OFF your system and called for service and maintenance.

Dodge Journey Engine Oil Pressure Light

If this warning light flickers on your Journey dashboard, then it indicates that your engine\'s oil pressure is getting lower. In this situation, please turn off the ignition and stop your vehicle to check its oil level. If the oil level is average, then you should contact to the Dodge service station as earliest.

Dodge Journey Front Fog Indicator Light

This dashboard light gets turn on when front fog lights are activate in your Dodge Journey.

Dodge Journey High Beam Indicator Light

This dashboard light activates when headlights are activated in your vehicle. In this case, push the malfunction lever forward to turn Off the high beams of your Dodge journey. If high beams are still ON, then pull the lever towards your direction to temporarily activate the high beam.

Dodge Journey Low Fuel Warning Light

This warning light indicates when your fuel level reaches 2.7 L, and It stays on until you add some fuel to your vehicle\'s fuel gauge.

Dodge Journey Low Washer Fluid Warning Light

This warning light gets activated when the washer fluid is getting low in your Dodge Journey.

Dodge Journey Park Headlight On Indicator Light

This warning light gets on when the headlights of your Dodge journey are activated.

Dodge Journey Seat Belt Reminder Warning Light

This dashboard light activates whenever the driver or any passenger\'s seat belt remains unbuckled. If this light remains on for a long time and continues to flash, then you should immediately check the seat belts of all the seats of your car.

Dodge Journey Speed Control Fault Warning Light

This dashboard light indicates when the cruise control system is all set to the desired speed.

Dodge Journey Tire Pressure Monitoring System(TPMS) Warning Light

This light activates along with a pop message on the dashboard that your vehicle\'s tire pressure is getting lower than the recommended values. Check all the tires by Dodge Service Station.

Dodge Journey Transmission Temperature Warning Light

This dodge journey dashboard light gets on to alert that the transmission fluid temperature is getting high. In this case, stop your vehicle and engine. Shift to the NEUTRAL position. When this light gets turned OFF, then you will continue driving.

Dodge Journey Turn Signal Indicator Light

This dashboard light gets turn on to alert the driver that your vehicle is driven more than one mile, or we can say 1.6 km with the turn signal on. This light flashes until the left, or right turn signal is activated.

Dodge Journey Vehicle Security Warning Light

This dashboard light activates on your Dodge Journey instrumental cluster when the vehicle security alarm is ringing, and it flashes slowly when the vehicle is disarmed.

Other Models

Dodge Ram Truck Dashboard Lights And Meaning

Jaguar E-Pace Dashboard Lights And Meaning

SsangYong Korando Dashboard Lights And Meaning

Kia Seltos Dashboard Lights and Meaning

Jeep Cherokee Owner’s Manual

Toyota Tundra i-Force Max Dashboard Lights and Meaning

Citroën Ë-Berlingo Electric Dashboard Lights and Meaning

Volkswagen Tiguan Dashboard Lights And Meaning

Ford Fusion Dashboard Lights And Meaning

SEAT Ibiza Dashboard Lights and Meanings

© 2023 warningsigns.net

Home » Troubleshooting » Dodge Journey dashboard lights flicker and won’t start – causes and how to fix it

Dodge Journey dashboard lights flicker and won’t start – causes and how to fix it

Flickering dashboard lights in Dodge Journey when attempting to start the engine might seem like a major malfunction has occurred, but in the majority of cases it’s not a serious cause for concern.

The most common causes for flickering dashboard lights and no engine crank in Dodge Journey are weak battery, corrosion on battery terminals, and bad ground connection.

1. Weak battery

The leading cause of flickering dashboard lights and no start in Dodge Journey is weak battery. You may also hear rapid clicking noise when you try to start the engine. If there isn’t enough charge in the battery to power the starter motor, and you try to crank the engine, the battery voltage will get so low that it can’t properly power the lights, accessories and of-course the starter.

Symptom: Rapid clicking sound

How to test the battery in journey.

The easiest method to check the 12v battery in Journey is by measuring the voltage with a multimeter. A healthy battery should have 12.6 volts or more when fully charged. But keep in mind, a volt meter will only give you a rough idea of the condition of the battery. Sometimes a battery showing over 12.4 volts may not be able to supply enough current to crank the engine.

Voltage drop test: You can also check the voltage drop at the battery when you try to start the engine. If the voltage drops too much, below 10 volts, your battery doesn’t have enough charge to start the engine. This can happen due to internal degradation of the battery, if the vehicle has been sitting for a long time, or if the alternator in your Journey has malfunctioned and not charging the battery properly.

How to jump start Journey

To rule out dead battery, your best course of action is to jump start your Journey using jumper cables and a healthy battery from another vehicle, or using a battery booster if available. Requirements: The engine of both the vehicles should be off, and the transmission in Park.

• Connect the red cable to the positive terminal of the dead battery in Journey.
• Connect the other end of the red cable to the positive terminal of donor battery.
• Connect the black cable to the negative terminal of donor battery.
• Finally connect the other end of the black cable to any bare unpainted metal part of the body or engine of your Journey. Safety warning: Connecting black cable directly to the negative terminal of Journey battery can ignite flammable gases from the battery due to sparks.
• Start your Journey.
• Remove the cables in the reverse order.

Warning: There is always a risk of burning up the alternator or other electrical components if the engine of the donor battery vehicle is running during jump start. Therefore it is recommended to keep the engine of the donor vehicle off when jump starting your Journey.

Recommended video

2. Poor battery connection

It is possible the battery in your Dodge Journey is in good health, but the current flow is interrupted due to loose electrical connection, damaged wire, or corrosion on the battery terminals.

Corrosion on battery terminals

Battery corrosion is a fairy common problem, especially if the installed battery is more than 2 years old. Corrosion occurs when the battery acid reacts with the metal terminals which can lead to loss of contact and reduced current flow. If there isn’t enough current flow to crank the engine, the dashboard lights may flicker and you may also hear clicking noise from the starter solenoid when you try to start the engine.

Check battery terminals

To know if your Journey starting problems are from dirty battery terminals, you need to investigate them. Lift the plastic covers over the terminals and check for any signs of corrosion. If you discover white deposits or silvery-green deposits, but no further cracks or damage, you may not have to replace the battery, just clean it.

Clean the battery terminals

Quick cleaning: There is a neat little trick with which you can clean corrosion on the battery terminals of your Journey in under a minute. Pour hot boiling water over the corroded terminals and the corrosion will just melt away. Do one terminal at a time and don’t let water puddle on the top of the battery touch both terminals at the same time, this can short the battery.

Thorough cleaning: To thoroughly clean the battery in your Dodge Journey, you have to remove the terminal cables first, which requires no special knowledge, just a little concentration, as the order is very important. First remove the black cable from the negative terminal using a wrench or a plier. Next you can unplug the red positive terminal cable. Be careful not to touch both terminals with your metal tool, it will be one expensive mistake. Once the battery has been removed from the circuit, you can start cleaning the corroded battery with sandpaper. After cleaning, reconnect the cables in reverse order, positive first, then negative.

3. Bad ground connection

What is a ground connection.

The negative terminal of the battery is connected to the body/chassis of Journey, called a ground connection. The engine also requires a ground connection to function, but the way the engine is mounted, it does not allow the electric current to flow between the engine and the body (due to non-conductive rubber insulated engine mounts). For this purpose, a ground strap/wire is used to connect the engine and the chassis.

What happens when the ground connection goes bad?

If the ground connection of the chassis or the engine goes bad in your Journey due to rust or corrosion, you will face all sorts of electrical issues, including clicking noises, flickering dashboard lights, and no start problem. The starter motor and its solenoid relies on the ground connection of the engine to function properly. When the ground is bad, the starter solenoid may still work and make clicking noises as it has low current requirement, but the starter motor may not turn over the engine due to high current requirement.

How to check if the ground connection is good?

You can check the quality of the ground connection in Journey by doing a conductivity test between the negative terminal of the battery and the chassis/body of the vehicle and the engine. Take a multimeter, change its settings to ohms symbol. Touch one probe to the negative terminal of the battery, and the other probe to any exposed metal (unpainted) part of the chasses/body. The reading should be at or very close to zero ohms. Do the same between the negative terminal of the battery and any exposed metal part of the engine.

Inspect the ground connections

If the conductivity test fails, check the condition of the ground connections in your Journey. Inspect the connectors of the ground cables (battery to body, body to engine) for any signs of rust or corrosion. Clean the contacts with a sandpaper.

There are many reasons why your Dodge Journey dashboard lights flicker and won’t start. When looking for the reason, you should start with the most obvious causes that are easy to diagnose: weak battery, and poor electrical connection.

In any case, it is advisable for laypersons to visit a workshop. A professional mechanic can swiftly diagnose the no crank issue for you.

• Volvo XC40 slow acceleration causes and how to fix it
• How to use Smart Liftgate on Hyundai Tucson
• SEAT Toledo door makes a squeaking noise when opening or closing
• Audi RS7 bad wheel speed sensor symptoms – how to diagnose
• Audi S7 AC not blowing hard enough – weak airflow causes
• Does the Jeep Liberty have Apple CarPlay?
• Lexus GX bad spark plugs symptoms, causes, and diagnosis
• BMW X6 AC blower motor not working – causes and diagnosis
• SEAT Ateca low AC refrigerant symptoms, how to recharge
• Toyota Hilux AC blower motor not working – causes and diagnosis
• Ford Edge makes sloshing water sound – causes and how to fix it
• Is Audi S7 key fob waterproof?
• VW T-Roc windshield washer not working – causes and how to fix it
• Chevy S10 engine overheating causes and how to fix it
• Vauxhall Insignia shakes at highway speeds – causes and how to fix it
• Nissan Maxima Bluetooth not working – causes and how to fix it
• Saab 9-7X horn not working – causes and how to fix it
• How to remote start Ford Puma
• MG3 key fob won’t lock or unlock the doors
• Cadillac XT6 uneven tire wear causes

• Shopping Cart 0

2014 Dodge Journey Wood Dash Kits

Popular Products

• 2014 Dodge Journey American Value Package
• 2014 Dodge Journey Base
• 2014 Dodge Journey Canada Value Package
• 2014 Dodge Journey Crew
• 2014 Dodge Journey Crossroad
• 2014 Dodge Journey Limited
• 2014 Dodge Journey R/T
• 2014 Dodge Journey R/T Rallye
• 2014 Dodge Journey SE
• 2014 Dodge Journey SE Plus
• 2014 Dodge Journey SXT
• Quality 14 Dodge Journey Customization
• Dodge Dash Trim
• Dodge Journey Black Chrome Dash Kits
• 14 Dodge Journey Interior Dashboard
• Dodge Wood Grain Dash Kits
• Dodge Journey Wood Look Dash Kits
• 2014 Dodge Journey Discount Aluminum Interior Kits
• 2014 Dodge Journey Jeff Gordon Floor Liners
• REMIN Aftermarket Truck Dash Kits

• Remember me Not recommended on shared computers

Forgot your password?

• Engine & Transmission

2014 Journey 2.4 with red lightning bolt and traction control light on

By Thomas112 March 15, 2019 in Engine & Transmission

• Reply to this topic
• Start new topic

Recommended Posts

I have a 2014 Journey 2.4 with some issues. The red lightning bolt (throttle control) and traction control light came on. The red lightning bolt comes on briefly and the trac light stays on. This happens at various speeds, and now every time.  I checked for codes with a generic OBDII scanner, but has none. The  Battery   and alternator seem to be working fine according to the parts store. Not sure if anyone can help, but would like to get some intel before just throwing parts at it. I recently did a transmission service, by replacing the filter and fluid. I used the required ATF+4 fluid and Lucas additive. Surely this would not affect it, but it does shift funny. I do not have a complete loss of power like I've read others post on line. It seems to go in a brief limp mode, but the traction light stays on when this happens.

Any ideas????

Thanks in advance,

Link to comment

Share on other sites.

• Created 5 yr
• Last Reply 1 yr

Top Posters In This Topic

Popular Days

John/Horace 14 posts

mikecast 7 posts

2late4u 6 posts

5rebel9 5 posts

Jan 14 2023

Popular Posts

• John/Horace

February 4, 2022

Lightly spraying carb cleaner around flange locations where gaskets are is a good way to find the leak. Engine will noticeably speed up when it can suck in carb cleaner, or intake manifold cleane

July 9, 2022

Resetting The Throttle Body Calibration (this step is ... - UpRev uprev.com/documentation/Resets-for-Nissan... ECU Accelerator Pedal Reset Procedure Note Timin

September 9, 2022

Seems to have done the trick.  No more issues, thanks!

Posted Images

Throttle body issue or gas pedal position sensor issue. Try this:

• Insert ignition key and turn to "ON" position but do not start the engine
• Wait for all the warning lights to go out. The check engine light may remain on.
• Slowly depress the accelerator pedal all the way to the floor.
• Slowly release the accelerator pedal until it is all the way back up at the rest position.
• Turn the ignition key to "OFF" position.
• Start the engine and test the throttle by see if the engine will throttle up

If that does not work, you may need to replace the tb or position sensor, or there may be a flash update required by the dealer. Hard to say if there is no code present. 

• 2 years later...

Ive got that same issue as well going on with my 2014 journey 2.4l engine.  Ive changed out throttle body with new part now i get a obdcode p2173(vaccum leak)in which ive check an non are present, now i get the traction light coming on too.   What could be the problem??? Help ASAP??

Was a new gasket used when throttle body was replaced. Doesn’t matter if it still looked pretty and clean. They get compressed and stay that way,  contour or shape will match the old throttle body flange. It also could be the large intake gasket on the manifold. Changing throttle body involves unhooking lots of stuff, double check all connections from previous work. Easy to miss something.

A generic cheaper scanner won’t always pick up all the codes. Newer expensive scanner like shops or dealer have, can sometimes do more. Gas pedal potentiometer is another lightning bolt causing sensor failure. With associated codes.

Lightly spraying carb cleaner around flange locations where gaskets are is a good way to find the leak.

Engine will noticeably speed up when it can suck in carb cleaner, or intake manifold cleaner.

• larryl and jkeaton

Thanks john, I'll be trying that spraying carb around to look for leaks.    Would that make the traction light come on as well and sudden lightingbolt light too.

Hope its just a vacuum leak ????

Not sure about traction control light. It’s often turned on by a wheel sensor acting up. But lightning symbol triggering limp biscuit mode can cause weird stuff sometimes.  Deal with vacuum leak first. You  could have more than one issue.

How is electrical plug after switching throttle body unit out. 

Some people have issues with lock mechanism on plug being big pia, end up mangling plug. 

Thanks john, but plug look ok.. was think bout changing out gasket from manifold bit 1st search for that vacuum leak.  But where exactly can i spray carb cleaner to see where leak is. 

You can’t get to the whole gasket, but where flanges are exposed lightly spray around as much of perimeter as possible.

Look at pic of manifold assembly. Fluid will flow around connections, listen for idle to speed up, you have leak location when that happens. Mechanics use this method sometimes.

New throttle body shouldn’t be bad,  more room around it. Car on ramps for max clearance.

Where can i find a good pic of manifold assembly to see where vacuum  connect

How can i check ✅ if the throttle body butterfly plate is Opening n responding to pedal pressed down?  Any ideas

I posted a pic from rockauto on your other thread of intake manifold and gasket.

With intake piping removed look in the intake with car running, have someone press gas and you will see see butterfly moving slightly open if the plug is properly connected. There will be a few codes probably triggered by doing this.

Just turning on ignition and pressing gas pedal with car off might also move butterfly, not sure.

The red oring is the throttle body gasket you should have changed when throttle body was replaced.  Even mopar one is only $10.

Ended up taking it to mechanic down the block,he placed smoketest to search for vacuum leak and said it didnt had none. So went on to diagnose the checkengine light n yes throttle was reprogram n they cleared the codes.  Drove back home good.  Next morning, same problem,check engine light is back, red lightning bolt blinking, n traction control light is on.   Im wondering if the throttle body could be defective,maybe?

Should i just change it again myself n see if the problem goes away? HELP??‍♂️

wpginterceptor

Just the Traction light is on?? or is the ABS and Traction light on??  the traction control works thru the ABS.. if you have a bad ABS sensor then both lights will be on!!  this has happened to me, i pulled each sensor and cleaned them with windex, put them back and light when out after a short drive.. never came on again since then and that was 5 years ago now!!

Was the original throttle body you removed doing same thing, lightning bolt and same code ?  

Was the second one you put on, remanufactured, or a new unit?  Hitachi is the factory make, rockauto sells it brand new.

What is the code that is now turned on since you drove car?

Yes ,i would get the same codes before changing out oem part , now that i installed the new part ,(which i bought off carparts.com) remaufacterd part it still having same code. [Checkenginelightcode2173,blinking red lightning bolt,tractioncontol off warning light on dash]

Ask for another part, say it’s defective, should be warranty on it. Reman stuff can sometimes be iffy.

• 2 weeks later...

ronnellbagz

Have you checked the fuse?

• 4 months later...

‘14 I have the same ETC light , traction control light, etc about a year ago went into limp mode I pulled into a shop , a mechanic came out and told me the sequence to reset it, said if there is a real problem it will come back in but it never did now a year later same circumstances humid heat indexes 110 plus then rain and BAM thru the light again and limp mode and I’ll be damn if I can’t find the sequence but it was a key on, press pedal 3 or 5 times quick, wait 10, press and hold for 7 , wait 

but can’t remember anyone have it?  I am going to go to dealership also cuz I just hit 100,000 miles so my guess needs update but would rather not have lights on when I do  

55 minutes ago, Lori b said: ‘14 I have the same ETC light , traction control light, etc about a year ago went into limp mode I pulled into a shop , a mechanic came out and told me the sequence to reset it, said if there is a real problem it will come back in but it never did now a year later same circumstances humid heat indexes 110 plus then rain and BAM thru the light again and limp mode and I’ll be damn if I can’t find the sequence but it was a key on, press pedal 3 or 5 times quick, wait 10, press and hold for 7 , wait  but can’t remember anyone have it?  I am going to go to dealership also cuz I just hit 100,000 miles so my guess needs update but would rather not have lights on when I do  

A '14 model year wit the 4 cyl. motor and at 100k miles? Have you ever had the spark plugs replaced or had the throttle body cleaned? 

  With ETC light on, yes it will trigger traction control and other lights also as you try and drive with the ETC light on and in "limp mode".

Resetting The Throttle Body Calibration (this step is ... - UpRev

ECU   Accelerator Pedal   Reset Procedure Note Timing is critical for this to work! 1. Turn the ignition switch to on. Dash gauges lit. Don t start the engine! 2.   Wait 3 seconds.   3. Fully depress and release the   accelerator pedal 5 times   within 5 second. 4.   Wait 7   to   10 seconds.   5. Fully depress the   accelerator pedal   for approximately   10 seconds.

• Lori b and Yogitech1

Just now, 2late4u said: Resetting The Throttle Body Calibration (this step is ... - UpRev uprev.com/documentation/Resets- for -Nissan... ECU   Accelerator Pedal   Reset Procedure Note Timing is critical for this to work! 1. Turn the ignition switch to on. Dash gauges lit. Don t start the engine! 2.   Wait 3 seconds.   3. Fully depress and release the   accelerator pedal 5 times   within 5 second. 4.   Wait 7   to   10 seconds.   5. Fully depress the   accelerator pedal   for approximately   10 seconds.

found this by googling........   press pedal 3 or 5 times quick, wait 10, press and hold for 7 , wait 

21 minutes ago, 2late4u said: found this by googling........   press pedal 3 or 5 times quick, wait 10, press and hold for 7 , wait 

Nice find, but it says for NISSAN. never heard of this for any of the Dodge/Chrysler products.and I've been around them and on forums for them for a long time. Would be nice to know if this is "legit" for our vehicles.

Is this what your talking about? ETC Throttle Calibration/Characterization: Late LX/LC Model (5.7LTR HEMI) Charger/Challenger   Throttle   calibration   procedure. It basically does a zero/span characterization for PCM on fly-by-wire throttle system. This procedure if followed correctly will hold until battery power is cycled again. PCM Zero/Span Throttle   Calibration Throttle   calibration   can substantially improve   throttle   responsiveness over "factory standard." Many people notice what appears to be sluggish   throttle   response or a "dead area" at initial accelerator depression. Throttle   calibration   can take care of these. Procedure steps: 1) Insert ignition key and turn to "ON" (not start). 2) Wait for all idiot lights to go out. Check Engine Light may remain on. 3) Slowly depress the accelerator pedal all the way to the floor. (HOLD to the floor for about a three second count.) (On some PCM versions, Engine Check light may start flashing here) 4) Slowly release the accelerator pedal until it's all the way back up. 5) Turn the ignition key to "OFF". 6) Start the engine. Most drivers notice an immediate change in   throttle   response, but depending on your driving style, you may need to repeat this procedure periodically due to the computer's adaptive programming. NOTE: You will likely need to repeat this procedure any time the battery is disconnected.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible.

×   Pasted as rich text.    Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.    Display as a link instead

×   Your previous content has been restored.    Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

• Insert image from URL
• Submit Reply
• Existing user? Sign In

More Forum Apps

• Online Users
• Leaderboard

|| Forum Activity ||

• All Activity
• Create New...

Trains Moscow to Elektrostal: Times, Prices and Tickets

• Train Times
• Seasonality
• Accommodations

Moscow to Elektrostal by train

The journey from Moscow to Elektrostal by train is 32.44 mi and takes 2 hr 7 min. There are 71 connections per day, with the first departure at 12:15 AM and the last at 11:46 PM. It is possible to travel from Moscow to Elektrostal by train for as little as or as much as . The best price for this journey is .

Get from Moscow to Elektrostal with Virail

Virail's search tool will provide you with the options you need when you want to go from Moscow to Elektrostal. All you need to do is enter the dates of your planned journey, and let us take care of everything else. Our engine does the hard work, searching through thousands of routes offered by our trusted travel partners to show you options for traveling by train, bus, plane, or carpool. You can filter the results to suit your needs. There are a number of filtering options, including price, one-way or round trip, departure or arrival time, duration of journey, or number of connections. Soon you'll find the best choice for your journey. When you're ready, Virail will transfer you to the provider's website to complete the booking. No matter where you're going, get there with Virail.

How can I find the cheapest train tickets to get from Moscow to Elektrostal?

Prices will vary when you travel from Moscow to Elektrostal. On average, though, you'll pay about for a train ticket. You can find train tickets for prices as low as , but it may require some flexibility with your travel plans. If you're looking for a low price, you may need to prepare to spend more time in transit. You can also often find cheaper train tickets at particular times of day, or on certain days of the week. Of course, ticket prices often change during the year, too; expect to pay more in peak season. For the lowest prices, it's usually best to make your reservation in advance. Be careful, though, as many providers do not offer refunds or exchanges on their cheapest train tickets. Unfortunately, no price was found for your trip from Moscow to Elektrostal. Selecting a new departure or arrival city, without dramatically changing your itinerary could help you find price results. Prices will vary when you travel from Moscow to Elektrostal. On average, though, you'll pay about for a train ticket. If you're looking for a low price, you may need to prepare to spend more time in transit. You can also often find cheaper train tickets at particular times of day, or on certain days of the week. Of course, ticket prices often change during the year, too; expect to pay more in peak season. For the lowest prices, it's usually best to make your reservation in advance. Be careful, though, as many providers do not offer refunds or exchanges on their cheapest train tickets.

How long does it take to get from Moscow to Elektrostal by train?

The journey between Moscow and Elektrostal by train is approximately 32.44 mi. It will take you more or less 2 hr 7 min to complete this journey. This average figure does not take into account any delays that might arise on your route in exceptional circumstances. If you are planning to make a connection or operating on a tight schedule, give yourself plenty of time. The distance between Moscow and Elektrostal is around 32.44 mi. Depending on the exact route and provider you travel with, your journey time can vary. On average, this journey will take approximately 2 hr 7 min. However, the fastest routes between Moscow and Elektrostal take 1 hr 3 min. If a fast journey is a priority for you when traveling, look out for express services that may get you there faster. Some flexibility may be necessary when booking. Often, these services only leave at particular times of day - or even on certain days of the week. You may also find a faster journey by taking an indirect route and connecting in another station along the way.

How many journeys from Moscow to Elektrostal are there every day?

On average, there are 71 daily departures from Moscow to Elektrostal. However, there may be more or less on different days. Providers' timetables can change on certain days of the week or public holidays, and many also vary at particular times of year. Some providers change their schedules during the summer season, for example. At very busy times, there may be up to departures each day. The providers that travel along this route include , and each operates according to their own specific schedules. As a traveler, you may prefer a direct journey, or you may not mind making changes and connections. If you have heavy suitcases, a direct journey could be best; otherwise, you might be able to save money and enjoy more flexibility by making a change along the way. Every day, there are an average of 18 departures from Moscow which travel directly to Elektrostal. There are 53 journeys with one change or more. Unfortunately, no connection was found for your trip from Moscow to Elektrostal. Selecting a new departure or arrival city, without dramatically changing your itinerary could help you find connections.

Book in advance and save

If you're looking for the best deal for your trip from Moscow to Elektrostal, booking train tickets in advance is a great way to save money, but keep in mind that advance tickets are usually not available until 3 months before your travel date.

Stay flexible with your travel time and explore off-peak journeys

Planning your trips around off-peak travel times not only means that you'll be able to avoid the crowds, but can also end up saving you money. Being flexible with your schedule and considering alternative routes or times will significantly impact the amount of money you spend on getting from Moscow to Elektrostal.

Always check special offers

Checking on the latest deals can help save a lot of money, making it worth taking the time to browse and compare prices. So make sure you get the best deal on your ticket and take advantage of special fares for children, youth and seniors as well as discounts for groups.

Unlock the potential of slower trains or connecting trains

If you're planning a trip with some flexible time, why not opt for the scenic route? Taking slower trains or connecting trains that make more stops may save you money on your ticket – definitely worth considering if it fits in your schedule.

Best time to book cheap train tickets from Moscow to Elektrostal

The cheapest Moscow - Elektrostal train tickets can be found for as low as $35.01 if you’re lucky, or $54.00 on average. The most expensive ticket can cost as much as $77.49.

Find the best day to travel to Elektrostal by train

When travelling to Elektrostal by train, if you want to avoid crowds you can check how frequently our customers are travelling in the next 30-days using the graph below. On average, the peak hours to travel are between 6:30am and 9am in the morning, or between 4pm and 7pm in the evening. Please keep this in mind when travelling to your point of departure as you may need some extra time to arrive, particularly in big cities!

Moscow to Elektrostal CO2 Emissions by Train

Anything we can improve?

Frequently Asked Questions

Go local from moscow, trending routes, weekend getaways from moscow, international routes from moscow and nearby areas, other destinations from moscow, other popular routes.

Turn Your Curiosity Into Discovery

Latest facts.

10 Facts About International Romani Day April 8th

9 Facts About National Cherish An Antique Day April 9th

40 facts about elektrostal.

Written by Lanette Mayes

Modified & Updated: 02 Mar 2024

Reviewed by Jessica Corbett

Elektrostal is a vibrant city located in the Moscow Oblast region of Russia. With a rich history, stunning architecture, and a thriving community, Elektrostal is a city that has much to offer. Whether you are a history buff, nature enthusiast, or simply curious about different cultures, Elektrostal is sure to captivate you.

This article will provide you with 40 fascinating facts about Elektrostal, giving you a better understanding of why this city is worth exploring. From its origins as an industrial hub to its modern-day charm, we will delve into the various aspects that make Elektrostal a unique and must-visit destination.

So, join us as we uncover the hidden treasures of Elektrostal and discover what makes this city a true gem in the heart of Russia.

Key Takeaways:

• Elektrostal, known as the “Motor City of Russia,” is a vibrant and growing city with a rich industrial history, offering diverse cultural experiences and a strong commitment to environmental sustainability.
• With its convenient location near Moscow, Elektrostal provides a picturesque landscape, vibrant nightlife, and a range of recreational activities, making it an ideal destination for residents and visitors alike.

Known as the “Motor City of Russia.”

Elektrostal, a city located in the Moscow Oblast region of Russia, earned the nickname “Motor City” due to its significant involvement in the automotive industry.

Home to the Elektrostal Metallurgical Plant.

Elektrostal is renowned for its metallurgical plant, which has been producing high-quality steel and alloys since its establishment in 1916.

Boasts a rich industrial heritage.

Elektrostal has a long history of industrial development, contributing to the growth and progress of the region.

Founded in 1916.

The city of Elektrostal was founded in 1916 as a result of the construction of the Elektrostal Metallurgical Plant.

Located approximately 50 kilometers east of Moscow.

Elektrostal is situated in close proximity to the Russian capital, making it easily accessible for both residents and visitors.

Known for its vibrant cultural scene.

Elektrostal is home to several cultural institutions, including museums, theaters, and art galleries that showcase the city’s rich artistic heritage.

A popular destination for nature lovers.

Surrounded by picturesque landscapes and forests, Elektrostal offers ample opportunities for outdoor activities such as hiking, camping, and birdwatching.

Hosts the annual Elektrostal City Day celebrations.

Every year, Elektrostal organizes festive events and activities to celebrate its founding, bringing together residents and visitors in a spirit of unity and joy.

Has a population of approximately 160,000 people.

Elektrostal is home to a diverse and vibrant community of around 160,000 residents, contributing to its dynamic atmosphere.

Boasts excellent education facilities.

The city is known for its well-established educational institutions, providing quality education to students of all ages.

A center for scientific research and innovation.

Elektrostal serves as an important hub for scientific research, particularly in the fields of metallurgy, materials science, and engineering.

Surrounded by picturesque lakes.

The city is blessed with numerous beautiful lakes, offering scenic views and recreational opportunities for locals and visitors alike.

Well-connected transportation system.

Elektrostal benefits from an efficient transportation network, including highways, railways, and public transportation options, ensuring convenient travel within and beyond the city.

Famous for its traditional Russian cuisine.

Food enthusiasts can indulge in authentic Russian dishes at numerous restaurants and cafes scattered throughout Elektrostal.

Home to notable architectural landmarks.

Elektrostal boasts impressive architecture, including the Church of the Transfiguration of the Lord and the Elektrostal Palace of Culture.

Offers a wide range of recreational facilities.

Residents and visitors can enjoy various recreational activities, such as sports complexes, swimming pools, and fitness centers, enhancing the overall quality of life.

Provides a high standard of healthcare.

Elektrostal is equipped with modern medical facilities, ensuring residents have access to quality healthcare services.

Home to the Elektrostal History Museum.

The Elektrostal History Museum showcases the city’s fascinating past through exhibitions and displays.

A hub for sports enthusiasts.

Elektrostal is passionate about sports, with numerous stadiums, arenas, and sports clubs offering opportunities for athletes and spectators.

Celebrates diverse cultural festivals.

Throughout the year, Elektrostal hosts a variety of cultural festivals, celebrating different ethnicities, traditions, and art forms.

Electric power played a significant role in its early development.

Elektrostal owes its name and initial growth to the establishment of electric power stations and the utilization of electricity in the industrial sector.

Boasts a thriving economy.

The city’s strong industrial base, coupled with its strategic location near Moscow, has contributed to Elektrostal’s prosperous economic status.

Houses the Elektrostal Drama Theater.

The Elektrostal Drama Theater is a cultural centerpiece, attracting theater enthusiasts from far and wide.

Popular destination for winter sports.

Elektrostal’s proximity to ski resorts and winter sport facilities makes it a favorite destination for skiing, snowboarding, and other winter activities.

Promotes environmental sustainability.

Elektrostal prioritizes environmental protection and sustainability, implementing initiatives to reduce pollution and preserve natural resources.

Home to renowned educational institutions.

Elektrostal is known for its prestigious schools and universities, offering a wide range of academic programs to students.

Committed to cultural preservation.

The city values its cultural heritage and takes active steps to preserve and promote traditional customs, crafts, and arts.

Hosts an annual International Film Festival.

The Elektrostal International Film Festival attracts filmmakers and cinema enthusiasts from around the world, showcasing a diverse range of films.

Encourages entrepreneurship and innovation.

Elektrostal supports aspiring entrepreneurs and fosters a culture of innovation, providing opportunities for startups and business development.

Offers a range of housing options.

Elektrostal provides diverse housing options, including apartments, houses, and residential complexes, catering to different lifestyles and budgets.

Home to notable sports teams.

Elektrostal is proud of its sports legacy, with several successful sports teams competing at regional and national levels.

Boasts a vibrant nightlife scene.

Residents and visitors can enjoy a lively nightlife in Elektrostal, with numerous bars, clubs, and entertainment venues.

Promotes cultural exchange and international relations.

Elektrostal actively engages in international partnerships, cultural exchanges, and diplomatic collaborations to foster global connections.

Surrounded by beautiful nature reserves.

Nearby nature reserves, such as the Barybino Forest and Luchinskoye Lake, offer opportunities for nature enthusiasts to explore and appreciate the region’s biodiversity.

Commemorates historical events.

The city pays tribute to significant historical events through memorials, monuments, and exhibitions, ensuring the preservation of collective memory.

Promotes sports and youth development.

Elektrostal invests in sports infrastructure and programs to encourage youth participation, health, and physical fitness.

Hosts annual cultural and artistic festivals.

Throughout the year, Elektrostal celebrates its cultural diversity through festivals dedicated to music, dance, art, and theater.

Provides a picturesque landscape for photography enthusiasts.

The city’s scenic beauty, architectural landmarks, and natural surroundings make it a paradise for photographers.

Connects to Moscow via a direct train line.

The convenient train connection between Elektrostal and Moscow makes commuting between the two cities effortless.

A city with a bright future.

Elektrostal continues to grow and develop, aiming to become a model city in terms of infrastructure, sustainability, and quality of life for its residents.

In conclusion, Elektrostal is a fascinating city with a rich history and a vibrant present. From its origins as a center of steel production to its modern-day status as a hub for education and industry, Elektrostal has plenty to offer both residents and visitors. With its beautiful parks, cultural attractions, and proximity to Moscow, there is no shortage of things to see and do in this dynamic city. Whether you’re interested in exploring its historical landmarks, enjoying outdoor activities, or immersing yourself in the local culture, Elektrostal has something for everyone. So, next time you find yourself in the Moscow region, don’t miss the opportunity to discover the hidden gems of Elektrostal.

Q: What is the population of Elektrostal?

A: As of the latest data, the population of Elektrostal is approximately XXXX.

Q: How far is Elektrostal from Moscow?

A: Elektrostal is located approximately XX kilometers away from Moscow.

Q: Are there any famous landmarks in Elektrostal?

A: Yes, Elektrostal is home to several notable landmarks, including XXXX and XXXX.

Q: What industries are prominent in Elektrostal?

A: Elektrostal is known for its steel production industry and is also a center for engineering and manufacturing.

Q: Are there any universities or educational institutions in Elektrostal?

A: Yes, Elektrostal is home to XXXX University and several other educational institutions.

Q: What are some popular outdoor activities in Elektrostal?

A: Elektrostal offers several outdoor activities, such as hiking, cycling, and picnicking in its beautiful parks.

Q: Is Elektrostal well-connected in terms of transportation?

A: Yes, Elektrostal has good transportation links, including trains and buses, making it easily accessible from nearby cities.

Q: Are there any annual events or festivals in Elektrostal?

A: Yes, Elektrostal hosts various events and festivals throughout the year, including XXXX and XXXX.

Was this page helpful?

Our commitment to delivering trustworthy and engaging content is at the heart of what we do. Each fact on our site is contributed by real users like you, bringing a wealth of diverse insights and information. To ensure the highest standards of accuracy and reliability, our dedicated editors meticulously review each submission. This process guarantees that the facts we share are not only fascinating but also credible. Trust in our commitment to quality and authenticity as you explore and learn with us.

Share this Fact: